euro quartz euroquartz limited blacknell lane crewkerne somerset uk ta18 7he tel: +44 (0)1460 230000 fax: +44 (0)1460 230001 email: info@euroquartz.co.uk www.euroquartz.co.uk description hdf14 series lvds output oscillators cover the frequency range 38mhz to 640mhz. the design contains a high 'q' fundamental crystal and utilizes a low jitter multiplier circuit. outline & dimensions frequency range: 38.0mhz to 640.0mhz output logic lvds phase noise: see table frequency stability: see table operating temp range commercial: -10 to +70c industrial: -40 to +85c input voltage: +2.5v or +3.3vdc 5% output logic high '1' v oh : 1.4v typical, 1.6v max. low '0' v ol : 0.9v min., 1.1v typical differential output voltage v od : 247mv min., 355mv typ., 454mv max. output 1 - output 2 differential output error dv od : -50mv min., 50mv max. output offset voltage v os : 1.125v min., 1.20v typ., 1.375v max. offset magnitude error dv os : 0mv min., 3mv typ., 25mv max. rise/fall times: 0.7ns typical, 1.0ns max. (20% to 80% of lvds waveform) current consumption (15pf load): 38mhz to 100mhz: 45ma max. 100.01 to 320mhz: 60ma max. 320.01 to 640mhz: 70ma max. load: 50 w from each output start-up time: 5ms typ., 10ms max. duty cycle: 50%5% (at 1.5v) drive capability: 100 ohms between outputs input static discharge prot: 2kv min. storage temperature range: -55c to +150c ageing: 3ppm per year max., 2ppm thereafter. at t amb +25c enable/disable: function not available in 4 pin package absolute maximum ratings ( permanent damage may be caused if operated beyond these limits. ) supply voltage vdd: +4.6vdc max. input voltage vi: vss -0.5 min., vdd +0.5v max. input voltage vo: vss -0.5 min., vdd +0.5v max. specification part numbers hdf14 oscillator part numbers are derived as follows: example: 3hdf14-a-250.000 hdf14 lvds oscillators 14 pin dual-in-line supply voltage 25 = 2.5vdc 3 = 3.3vdc series designation package style 14 pin dil stability code (see table) frequency stability over temperature range stability temperature range order code ppm c 25 -10 to +70 a 50 -10 to +70 b 100 -10 to +70 c 25 -40 to +85 d 50 -40 to +85 e 100 -40 to +85 f offset 10hz -62 100hz -92 1khz -120 10khz -132 100khz -128 1mhz -140 10mhz -150 dbc/hz phase noise (156.250mhz) typ. 0.4ps 0.5ps 3.0ps 5.0ps 20ps 30ps max. integrated phase jitter: (12khz to 20mhz) period jitter: (rms) period jitter: (peak to peak) jitter (156.520mhz)
|
